コンテンツの開始

研究成果

2011年度

ジャーナル論文

  1. K.T. Tan, N. Watanabe, Y. Iwahori and T. Ishikawa (2012) Understanding Effectiveness of Stitching in Suppression of Impact Damage: An Empirical Delamination Reduction Trend for Stitched Composites, Composites A, 43, 823-832.
  2. K.T. Tan, N. Watanabe, Y. Iwahori and T. Ishikawa (2012) Effect of Stitch Density and Stitch Thread Thickness on Compression After Impact Strength and Response of Stitched Composites, Composites Science and Technology 72, 87-598.
  3. A Yudhanto, Y Iwahori, N Watanabe, H Hoshi (2012) Open hole fatigue characteristics and damage growth of stitched plain weave carbon/epoxy laminates, International Journal of Fatigue (Accepted).
  4. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi. (2012) The Effects of Stitch Orientation on the Tensile and Open Hole Tension Properties of Plain Weave Carbon/Epoxy Laminates. Journal of Materials & Design, 35, 563-571.
  5. K.T. Tan, N. Watanabe and Y. Iwahori (2011) X-ray Radiography and micro Computed Tomography Examination of Damage Characteristics in Stitched Composites subjected to Impact Loading, Composites Part B: Engineering, 42, 874-884.
  6. K.T. Tan, N. Watanabe and Y. Iwahori (2011) Impact Damage Resistance, Response and Mechanisms of Laminated Composites Reinforced by Through-Thickness Stitching, International Journal of Damage Mechanics, in press. doi: 10.1177/1056789510397070.
  7. Asai M., Inasawa A., Konishi Y., Hoshino S. and Takagi S.: Experimental study on the instability of wake of axisymmetric streamlined body, Journal of Fluid Mechanics, 675 (2011) 574-595.
  8. Floryan J.M. and Asai M.: On the transition between distributed and isolated surface roughness and its effect on the stability of channel flow, Physics of Fluids, 23 (2011) 104101.
  9. Inasawa A., Mori F. and Asai M.: Detailed Observations of Interaction of Wing-Tip Vortices in Close Formation Flight, Journal of Aircraft, 49(1) (2012) 206-213.

国際会議発表

  1. K.T. Tan, N. Watanabe and Y. Iwahori (2011). Fracture Behaviour and Damage Characteristics of Stitched Composites under Impact and Post Impact Loading, Conference Proceeding for 6th International Conference on Fracture of Polymers, Composites and Adhesives, 11-15 Sept, Les Diablerets, Switzerland.
  2. K.T. Tan, N. Watanabe, A. Yoshimura, Y. Iwahori and T. Ishikawa (2011). Progressive Damage in Stitched Composites under Impact Loading, Conference Proceeding for 18th International Conference on Composite Materials, ICCM-18, 21-26 Aug, Jeju Island, Korea.
  3. K.T. Tan, N. Watanabe, Y. Iwahori and T. Ishikawa (2011). Influence of Stitch Density and Stitch Thread Thickness on Compression After Impact Strength of Stitched Composites, Conference Proceeding for 16th International Conference on Composite Structures, ICCS-16, 28-30 Jun, Porto, Portugal.
  4. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Mechanical Properties of Vectran-Stitched Laminates under Static and Fatigue Loadings, Proceeding of the 6th International Conference on Fracture of Polymers, Composites and Adhesives, September 11-15, 2011, Les Diablerets, Switzerland.
  5. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Mechanical Properties of Vectran-Stitched Composites: Numerical Simulation and Experimental Validation. Proceeding of the 18th International Conference of Composite Materials (ICCM-18), August 21-26, 2011, Jeju Island, South Korea.
  6. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). In-plane Mechanical Properties of Vectran-Stitched Composites by Homogenization Method, Proceeding of the 16th International Conference on Composite Structures (ICCS-16), June 28-30, 2011, Porto, Portugal.
  7. Asai M.: Streak Breakdown Leading to Wall Turbulence, Plenary Lecture, The Sixth International Conf. Fluid Mechanics, Guangzhou, June 30-July 3, 2011.
  8. Inasawa A., Asai M., Itoh K. and Kamijyo T.:Suppression control of trailing-edge noise using a plasma actuator, International Conf. Fluid Mechanics, Guangzhou, June 30-July 3, 2011.
  9. Inasawa A., Nakano T. and Asai M.: Development of wake vortices for a rectangular cylinder of various aspect ratios and the associated sound radiation, the Seventh International Symposium on Turbulence and Shear Flow Phenomena, Ottawa, Canada, 28-31 July, 2011.

国内学会発表

  1. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Numerical and Experimental Studies of the Mechanical Properties of Stitched Composites, Proceeding of the Annual Meeting on Science and Technology Studies (AMSTECS), June 10-12, 2011, Tokyo. (Best Presentation Award).
  2. M.D. Mamun, M. Shigeta, M. Asai and A. Inasawa: Influences of surface roughness on boundary-layer instability and transition, Proc. Annual Meeting Japan Soc. Fluid Mech., Sept. 7-9, 2011, Tokyo.
  3. タン クゥエックズ, 渡辺直行, 星光, 岩堀豊, 石川隆司 (2011). 縫合積層板の衝撃後圧縮強度の向上, 第2回日本複合材料合同会議, JCCM-2, 3月16-18日, 東京.
  4. タン クゥエックズ, 渡辺直行, 星光, 吉村彰記, 岩堀豊, 石川隆司 (2011). 縫合積層板に対する静的押し込み試験における損傷観察, 第53回構造強度に関する講演会, 7月27-29日, 秋田.

成果の展示

東京国際航空宇宙産業展2011
首都大学東京出展ブース全景
東京国際航空宇宙産業展2011
首都大学東京出展ブース全景
東京国際航空宇宙産業展2011
先進複合材翼構造(左下)と構造健全性診断システム(右下)
東京国際航空宇宙産業展2011
先進複合材翼構造(左下)と構造健全性診断システム(右下)
東京国際航空宇宙産業展2011
研究内容ポスター展示
東京国際航空宇宙産業展2011
研究内容ポスター展示