start contents

PhD Students

Arief Yudhanto, PhD 画像

Arief Yudhanto, PhD

From Indonesia

■Introduction

He studied aeronautics at the Institute of Technology Bandung and obtained masters degree in applied mechanics from National University of Singapore. He is currently working on composite mechanics at the Graduate School of System Design, Tokyo Metropolitan University. Prior attending Ph.D. program, he was a researcher in Agency for Science, Technology and Research, and an engineer in Hitachi GST, both in Singapore. He received his PhD degree in March 2013.

■Journal papers
  1. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi. (2012) Effect of Stitch Density on Tensile Properties and Damage Mechanisms of Stitched Carbon/Epoxy Composites. Composites Part B (Accepted).
  2. A Yudhanto, Y Iwahori, N Watanabe, H Hoshi. Open hole fatigue characteristics and damage growth of stitched plain weave carbon/epoxy laminates, International Journal of Fatigue, Volume 43, (2012), pp. 12-22.
  3. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi, The effects of stitch orientation on the tensile and open hole tension properties of carbon/epoxy plain weave laminates, Materials & Design, Volume 35, (2012), pp. 563-571.
  4. Tong-Earn Tay, Guangyan Liu and Arief Yudhanto, Vincent BC Tan. A Micro-Macro Approach to Modeling Progressive Damage in Composite Structures, J. Damage Mechanics, 17 (2008) 5-28
  5. Arief Yudhanto, Tong-Earn Tay, Vincent BC Tan. Micromechanical Characterization Parameters for a New Failure Theory for Composite Structures, Key Engineering Materials, 306-308 (2006) 781-786.
■Conference papers
  1. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Mechanical Properties of Vectran-Stitched Laminates under Static and Fatigue Loadings, Proceeding of the 6th International Conference on Fracture of Polymers, Composites and Adhesives, September 11-15, 2011, Les Diablerets, Switzerland.
  2. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Mechanical Properties of Vectran-Stitched Composites: Numerical Simulation and Experimental Validation. Proceeding of the 18th International Conference of Composite Materials (ICCM-18), August 21-26, 2011, Jeju Island, South Korea.
  3. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). In-plane Mechanical Properties of Vectran-Stitched Composites by Homogenization Method, Proceeding of the 16th International Conference on Composite Structures (ICCS-16), June 28-30, 2011, Porto, Portugal.
  4. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Numerical and Experimental Studies of the Mechanical Properties of Stitched Composites, Proceeding of the Annual Meeting on Science and Technology Studies (AMSTECS), June 10-12, 2011, Tokyo, Japan. (Best Presentation Award).
  5. N Watanabe, S Takahashi, A Yudhanto (2011). Formulation of 3D Homogenization Method with Relieved Periodic Boundary Condition. Proceeding of the 53rd International Conference on Structural Mechanics, July 27-29, 2011, Akita, Japan.
  6. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Prediction of Mechanical Properties of Vectran-Stitched Composites by Homogenization Method, Proceeding of the 2nd Japan Society of Composite Materials Conference (JSCM-2), March 16-18, 2011, Tokyo, Japan.
  7. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2011). Tensile Fatigue Properties of Vectran-Stitched Composites containing Hole, Proceeding of the 3rd Regional Conference on Mechanical and Aerospace Technology (RCMeAe 2011), March 4-5, 2011, Manila, Philippines.
  8. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2010). Damage Progression in Stitched Composites Containing Hole under Fatigue Load. Proceeding of the US-Japan Conference Composite/American Society of Composites, September 20-23, 2010, Dayton, Ohio, USA.
  9. A Yudhanto, N Watanabe, Y Iwahori, H Hoshi (2010). Open Hole Tension Characteristics of Plain-Woven and Non-Crimp Fabrics with Stitches. Proceeding of the 52nd International Conference on Structural Mechanics, July 21-23, 2011, Tottori, Japan.
  10. A Yudhanto, N Watanabe, H Hoshi, Y Iwahori (2010). In-plane Mechanical Characteristics of Stitched Fabrics with and without Holes. Proceeding of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.
  11. Arief Yudhanto, Ong Eng Teo and Ong Eng Hong. Effects of Element Formulations of 8-noded Hexahedron on HDD Dynamics under Shock. 6th Asia-Pacific Conf. on Shock & Impact on Structures, 2007
  12. Chua KT, Arief Yudhanto, Mou J and Ong EH. Investigation of Soft-Failure of Small-Form Factor HDD under Forced-Vibration. Conf. Proc. Asia-Pacific Magnetic Recording Conf, Singapore, 2006.
  13. Arief Yudhanto and Bambang K. Hadi. Sandwich Panels Stability under Constant Displacement, 3rd Numerical Analysis in Engineering Conf. 2003.
 
 
 
| UP |